

Référence: 10651
Marque: Amidon
Dimension intérieure : 7.70mm Dimension extérieure : 12.70mm Hauteur : 4.83mm AL : 49µH Fréquence : 30MHz maximum
Référence: 10238
Marque: Panasonic
Les condensateurs de la série Panasonic EEUFC sont des condensateurs électrolytiques en aluminium polarisé CMS. Les valeurs de capacité sont comprises entre 1µF et 1500µF. Ces condensateurs sont une solution pour les solutions à faible impédance. Fiabilité élevée Faible impédance Conforme à la norme AEC-Q200 pour le secteur automobile Tolérance de...
Référence: 10652
Marque: Amidon
Dimension intérieure : 7.70mm Dimension extérieure : 12.70mm Hauteur : 4.83mm AL : 46µH Fréquence : 50MHz maximum
Livraison Colissimo 5 euros/TTC ou Lettre suivie 2.90 euros/TTC
Référence: 10057
Marque: Texas Instruments
CD4098B dual monostable multivibrator provides stable retriggerable/resettable one-shot operation for any fixed-voltage timing application.
Référence: 11495
Marque: Texas Instruments
6-ch, 3-V to 18-V inverters with Schmitt-Trigger inputs
Référence: 10050
Marque: Texas Instruments
CD4076B types are four-bit registers consisting of D-type flip-flops that feature three-state outputs. Data Disable inputs are provided to control the entry of data into the flip-flops. When both Data Disable inputs are low, data at the D inputs are loaded into their respective flip-flops on the next positive transition of the clock input. Output Disable...
Référence: 10046
Marque: Texas Instruments
CD4071B, CD4072B and CD4075B OR gates provide the system designer with direct implementation of the positive-logic OR function and supplement the existing family of CMOS gates.
Référence: 10041
Marque: Texas Instruments
CD4063B is a 4-bit magnitude comparator designed for use in computer and logic applications that require the comparison of two 4-bit words. This logic circuit determines whether one 4-bit word (Binary or BCD) is "less than", "equal to", or "greater than" a second 4-bit word.
Référence: 10029
Marque: Texas Instruments
CD4043B types are quad cross-coupled 3-state CMOS NOR latches and the CD4044B types are quad cross-coupled 3-state CMOS NAND latches. Each latch has a separate Q output and individual SET and RESET inputs. The Q outputs are controlled by a common ENABLE input. A logic "1" or high on the ENABLE input connects the latch states to the Q outputs. A logic "0"...
Référence: 10039
Marque: Texas Instruments
Référence: 10021
Marque: Texas Instruments
CD4028 types are BCD-to-decimal or binary-to-octal decoders consisting of buffering on all 4 inputs, decoding-logic gates, and 10 output buffers. A BCD code applied to the four input, A to D, results in a high level at the selected one of 10 decimal decoded outputs. Similarly, a 3-bit binary code applied to inputs A through C is decoded in octal code at...
Référence: 11333
Marque: Texas Instruments
Medium-speed operation - tPHL = 90 ns; tPLH = 125 ns (typ.) at 10 V Individual inhibit controls Standardized symmetrical output characteristics 100% tested for quiescent current at 20 V Maximum input current of 1 µA at 18 V over full package-temperature range; 100 nA at 18 V and 25°C Noise margin (over full package-temperature range): 1 V at VDD = 5 V 2 V...
Référence: 16903
Marque: Texas Instruments
Référence: 10037
Marque: Texas Instruments
The CD405xB analog multiplexers and demuliplexers are digitally-controlled analog switches having low ON impedance and very low OFF leakage current. These multiplexer circuits dissipate extremely low quiescent power over the full VDD – VSS and VDD – VEE supply-voltage ranges, independent of the logic state of the control signals.
Référence: 10013
Marque: Texas Instruments
CD4019B types consist of four AND/OR select gate configurations, each consisting of two 2-input AND gates driving a single-input OR gate. Selection is accomplished by control bits Ka and Kb. In addition to selection of either channel A or channel B information, the control bits can be applied simultaneously to accomplish the logical A + B function.
Référence: 10035
Marque: Texas Instruments
The CD4049UB and CD4050B devices are inverting and noninverting hex buffers, and feature logic-level conversion using only one supply voltage (VCC). The input-signal high level (VIH) can exceed the VCC supply voltage when these devices are used for logic-level conversions. These devices are intended for use as CMOS to DTL or TTL converters and can drive...
Référence: 15994
Marque: Texas Instruments
Référence: 10043
Marque: Texas Instruments
CD4068B NAND/AND gate provides the system designer with direct implementation of the positive-logic 8-input NAND and AND functions and supplements the existing family of CMOS gates.
Référence: 10011
Marque: Texas Instruments
CD4017B and CD4022B are 5-stage and 4-stage Johnson counters having 10 and 8 decoded outputs, respectively. Inputs include a CLOCK, a RESET, and a CLOCK INHIBIT signal. Schmitt trigger action in the CLOCK input circuit provides pulse shaping that allows unlimited clock input pulse rise and fall times.
Référence: 10049
Marque: Texas Instruments
CD4071B, CD4072B and CD4075B OR gates provide the system designer with direct implementation of the positive-logic OR function and supplement the existing family of CMOS gates.
Référence: 10020
Marque: Texas Instruments
CD4027B is a single monolithic chip integrated circuit containing two identical complementary-symmetry J-K master-slave flip-flops. Each flip-flop has provisions for individual J, K, Set, Reset, and Clock input signals. Buffered Q and Q signals are provided as outputs. This input-ouput arrangement provides for compatible operation with the RCA-CD4013B...
Référence: 15796
Marque: Texas Instruments
Référence: 10008
Marque: Texas Instruments
CD4014B and CD4021B series types are 8-stage parallel- or serial-input/serial output registers having common CLOCK and PARALLEL/SERIAL CONTROL inputs, a single SERIAL data input, and individual parallel "JAM" inputs to each register stage. Each register stage is D-type, master-slave flip-flop. In addition to an output form stage 8, "Q" outputs are also...