

Référence: 10651
Marque: Amidon
Dimension intérieure : 7.70mm Dimension extérieure : 12.70mm Hauteur : 4.83mm AL : 49µH Fréquence : 30MHz maximum
Référence: 10238
Marque: Panasonic
Les condensateurs de la série Panasonic EEUFC sont des condensateurs électrolytiques en aluminium polarisé CMS. Les valeurs de capacité sont comprises entre 1µF et 1500µF. Ces condensateurs sont une solution pour les solutions à faible impédance. Fiabilité élevée Faible impédance Conforme à la norme AEC-Q200 pour le secteur automobile Tolérance de...
Référence: 10652
Marque: Amidon
Dimension intérieure : 7.70mm Dimension extérieure : 12.70mm Hauteur : 4.83mm AL : 46µH Fréquence : 50MHz maximum
CD4043B types are quad cross-coupled 3-state CMOS NOR latches and the CD4044B types are quad cross-coupled 3-state CMOS NAND latches. Each latch has a separate Q output and individual SET and RESET inputs. The Q outputs are controlled by a common ENABLE input. A logic "1" or high on the ENABLE input connects the latch states to the Q outputs. A logic "0" or low on the ENABLE input disconnects the latch states from the Q outputs, resulting in an open circuit condition on the Q outputs. The open circuit feature allows common busing of the outputs.
Livraison Colissimo 5 euros/TTC ou Lettre suivie 2.90 euros/TTC
Référence: 10046
Marque: Texas Instruments
CD4071B, CD4072B and CD4075B OR gates provide the system designer with direct implementation of the positive-logic OR function and supplement the existing family of CMOS gates.
Référence: 10047
Marque: Texas Instruments
CD4071B, CD4072B and CD4075B OR gates provide the system designer with direct implementation of the positive-logic OR function and supplement the existing family of CMOS gates.
Référence: 10055
Marque: Texas Instruments
CD4093B consists of four Schmitt-trigger circuits. Each circuit functions as a two-input NAND gate with Schmitt-trigger action on both inputs. The gate switches at different points for positive- and negative-going signals. The difference between the positive voltage (VP) and the negative voltage (VN) is defined as hysteresis voltage (VH
Référence: 10026
Marque: Texas Instruments
CD4041UB types are quad true/complement buffers consisting of n- and p-channel units having low channel resistance and high current (sourcing and sinking) capability. The CD4041UB is intended for use as a buffer, line-driver, or CMOS-to-TTL driver. It can be used as an ultra-low power resistor-network driver for A/D and D/A conversion, as a...
Référence: 10043
Marque: Texas Instruments
CD4068B NAND/AND gate provides the system designer with direct implementation of the positive-logic 8-input NAND and AND functions and supplements the existing family of CMOS gates.
Référence: 10009
Marque: Texas Instruments
CD4015B consists of two identical, independent, 4-stage serial-input/parallel-output registers. Each register has independent CLOCK and RESET inputs as well as a single serial DATA input. "Q" outputs are available from each of the four stages on both registers. All register stages are D-type, master-slave flip-flops. The logic level present at the DATA...
Référence: 10040
Marque: Texas Instruments
CD4060B consists of an oscillator section and 14 ripple-carry binary counter stages. The oscillator configuration allows design of either RC or crystal oscillator circuits. A RESET input is provided which resets the counter to the all-O's state and disables the oscillator. A high level on the RESET line accomplishes the reset function. All counter stages...
Référence: 10006
Marque: Texas Instruments
CD4011B, CD4012B, and CD4023B NAND gates provide the system designer with direct implementation of the NAND function and supplement the existing family of CMOS gates. All inputs and outputs are buffered.
Référence: 10000
Marque: Texas Instruments
4-ch, 2-input, 3-V to 18-V NOR gates
Référence: 10051
Marque: Texas Instruments
The Harris CD4070B contains four independent Exclusive-OR gates. The Harris CD4077B contains four independent Exclusive-NOR gates. The CD4070B and CD4077B provide the system designer with a means for direct implementation of the Exclusive-OR and Exclusive-NOR functions, respectively.
Référence: 10054
Marque: Texas Instruments
CD4073B, CD4081B and CD4082B AND gates, provide the system designer with direct implementation of the AND function and supplement the existing family of CMOS gates.
Référence: 10018
Marque: Texas Instruments
CD4001B, CD4002B, and CD4025B NOR gates provide the system designer with direct implementation of the NOR function and supplement the existing family of CMOS gates. All inputs and outputs are buffered.
Référence: 10048
Marque: Texas Instruments
CD4073B, CD4081B and CD4082B AND gates, provide the system designer with direct implementation of the AND function and supplement the existing family of CMOS gates.
Référence: 10002
Marque: Texas Instruments
dual complementary pair plus inverter
Référence: 17657
Marque: Texas Instruments
Référence: 10030
Marque: Texas Instruments
CD4046B CMOS Micropower Phase-Locked Loop (PLL) consists of a low-power, linear voltage-controlled oscillator (VCO) and two different phase comparators having a common signal-input amplifier and a common comparator input. A 5.2-V zener diode is provided for supply regulation if necessary.
Référence: 10039
Marque: Texas Instruments
Référence: 10021
Marque: Texas Instruments
CD4028 types are BCD-to-decimal or binary-to-octal decoders consisting of buffering on all 4 inputs, decoding-logic gates, and 10 output buffers. A BCD code applied to the four input, A to D, results in a high level at the selected one of 10 decimal decoded outputs. Similarly, a 3-bit binary code applied to inputs A through C is decoded in octal code at...
CD4043B types are quad cross-coupled 3-state CMOS NOR latches and the CD4044B types are quad cross-coupled 3-state CMOS NAND latches. Each latch has a separate Q output and individual SET and RESET inputs. The Q outputs are controlled by a common ENABLE input. A logic "1" or high on the ENABLE input connects the latch states to the Q outputs. A logic "0" or low on the ENABLE input disconnects the latch states from the Q outputs, resulting in an open circuit condition on the Q outputs. The open circuit feature allows common busing of the outputs.