

Référence: 10651
Marque: Amidon
Dimension intérieure : 7.70mm Dimension extérieure : 12.70mm Hauteur : 4.83mm AL : 49µH Fréquence : 30MHz maximum
Référence: 10238
Marque: Panasonic
Les condensateurs de la série Panasonic EEUFC sont des condensateurs électrolytiques en aluminium polarisé CMS. Les valeurs de capacité sont comprises entre 1µF et 1500µF. Ces condensateurs sont une solution pour les solutions à faible impédance. Fiabilité élevée Faible impédance Conforme à la norme AEC-Q200 pour le secteur automobile Tolérance de...
Référence: 10652
Marque: Amidon
Dimension intérieure : 7.70mm Dimension extérieure : 12.70mm Hauteur : 4.83mm AL : 46µH Fréquence : 50MHz maximum
CD4016B Series types are quad bilateral switches intended for the transmission or multiplexing of analog or digital signals. Each of the four independent bilateral switches has a single control signal input which simultaneously biases both the p and n device in a given switch on or off.
Livraison Colissimo 5 euros/TTC ou Lettre suivie 2.90 euros/TTC
Référence: 10015
Marque: Texas Instruments
Medium speed operation…12 MHz (typ.) clock rate at VDD – VSS = 10 V Fully static operation 8 master-slave flip-flops plus output buffering and control gating 100% tested for quiescent current at 20 V Maximum input current of 1 µA at 18 V over full package-temperature range; 100 nA at 18 V and 25°C Noise margin (full package-temperature range) = 1...
Référence: 10014
Marque: Texas Instruments
CD4020B, CD4024B, and CD4040B are ripple-carry binary counters. All counter stages are master-slave flip-flops. The state of a counter advances one count on the negative transition of each input pulse; a high level on the RESET line resets the counter to its all zeros state. Schmitt trigger action on the input-pulse line permits unlimited rise and fall...
Référence: 10037
Marque: Texas Instruments
The CD405xB analog multiplexers and demuliplexers are digitally-controlled analog switches having low ON impedance and very low OFF leakage current. These multiplexer circuits dissipate extremely low quiescent power over the full VDD – VSS and VDD – VEE supply-voltage ranges, independent of the logic state of the control signals.
Référence: 11495
Marque: Texas Instruments
6-ch, 3-V to 18-V inverters with Schmitt-Trigger inputs
Référence: 10042
Marque: Texas Instruments
The CD4066B device is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin-for-pin compatible with the CD4016B device, but exhibits a much lower on-state resistance. In addition, the on-state resistance is relatively constant over the full signal-input range.
Référence: 15796
Marque: Texas Instruments
Référence: 10050
Marque: Texas Instruments
CD4076B types are four-bit registers consisting of D-type flip-flops that feature three-state outputs. Data Disable inputs are provided to control the entry of data into the flip-flops. When both Data Disable inputs are low, data at the D inputs are loaded into their respective flip-flops on the next positive transition of the clock input. Output Disable...
Référence: 15994
Marque: Texas Instruments
Référence: 10030
Marque: Texas Instruments
CD4046B CMOS Micropower Phase-Locked Loop (PLL) consists of a low-power, linear voltage-controlled oscillator (VCO) and two different phase comparators having a common signal-input amplifier and a common comparator input. A 5.2-V zener diode is provided for supply regulation if necessary.
Référence: 10045
Marque: Texas Instruments
The Harris CD4070B contains four independent Exclusive-OR gates. The Harris CD4077B contains four independent Exclusive-NOR gates. The CD4070B and CD4077B provide the system designer with a means for direct implementation of the Exclusive-OR and Exclusive-NOR functions, respectively.
Référence: 10020
Marque: Texas Instruments
CD4027B is a single monolithic chip integrated circuit containing two identical complementary-symmetry J-K master-slave flip-flops. Each flip-flop has provisions for individual J, K, Set, Reset, and Clock input signals. Buffered Q and Q signals are provided as outputs. This input-ouput arrangement provides for compatible operation with the RCA-CD4013B...
Référence: 10054
Marque: Texas Instruments
CD4073B, CD4081B and CD4082B AND gates, provide the system designer with direct implementation of the AND function and supplement the existing family of CMOS gates.
Référence: 10047
Marque: Texas Instruments
CD4071B, CD4072B and CD4075B OR gates provide the system designer with direct implementation of the positive-logic OR function and supplement the existing family of CMOS gates.
Référence: 10011
Marque: Texas Instruments
CD4017B and CD4022B are 5-stage and 4-stage Johnson counters having 10 and 8 decoded outputs, respectively. Inputs include a CLOCK, a RESET, and a CLOCK INHIBIT signal. Schmitt trigger action in the CLOCK input circuit provides pulse shaping that allows unlimited clock input pulse rise and fall times.
Référence: 10029
Marque: Texas Instruments
CD4043B types are quad cross-coupled 3-state CMOS NOR latches and the CD4044B types are quad cross-coupled 3-state CMOS NAND latches. Each latch has a separate Q output and individual SET and RESET inputs. The Q outputs are controlled by a common ENABLE input. A logic "1" or high on the ENABLE input connects the latch states to the Q outputs. A logic "0"...
Référence: 10049
Marque: Texas Instruments
CD4071B, CD4072B and CD4075B OR gates provide the system designer with direct implementation of the positive-logic OR function and supplement the existing family of CMOS gates.
Référence: 10002
Marque: Texas Instruments
dual complementary pair plus inverter
Référence: 10023
Marque: Texas Instruments
CD4030B types consist of four independent Exclusive-OR gates. THe CD4030B provides the system designer with a means for direct implementation of the Exclusive-OR function.
Référence: 10009
Marque: Texas Instruments
CD4015B consists of two identical, independent, 4-stage serial-input/parallel-output registers. Each register has independent CLOCK and RESET inputs as well as a single serial DATA input. "Q" outputs are available from each of the four stages on both registers. All register stages are D-type, master-slave flip-flops. The logic level present at the DATA...
CD4016B Series types are quad bilateral switches intended for the transmission or multiplexing of analog or digital signals. Each of the four independent bilateral switches has a single control signal input which simultaneously biases both the p and n device in a given switch on or off.