

Référence: 10651
Marque: Amidon
Dimension intérieure : 7.70mm Dimension extérieure : 12.70mm Hauteur : 4.83mm AL : 49µH Fréquence : 30MHz maximum
Référence: 10238
Marque: Panasonic
Les condensateurs de la série Panasonic EEUFC sont des condensateurs électrolytiques en aluminium polarisé CMS. Les valeurs de capacité sont comprises entre 1µF et 1500µF. Ces condensateurs sont une solution pour les solutions à faible impédance. Fiabilité élevée Faible impédance Conforme à la norme AEC-Q200 pour le secteur automobile Tolérance de...
Référence: 10652
Marque: Amidon
Dimension intérieure : 7.70mm Dimension extérieure : 12.70mm Hauteur : 4.83mm AL : 46µH Fréquence : 50MHz maximum
CD4015B consists of two identical, independent, 4-stage serial-input/parallel-output registers. Each register has independent CLOCK and RESET inputs as well as a single serial DATA input. "Q" outputs are available from each of the four stages on both registers. All register stages are D-type, master-slave flip-flops. The logic level present at the DATA input is transferred into the first register stage and shifted over one stage at each positive-going clock transition. Resetting of all stages is accomplished by a high level on the reset line. Register expansion to 8 stages using one CD4015B package, or to more than 8 stages using additional CD4015B’s is possible
Livraison Colissimo 5 euros/TTC ou Lettre suivie 2.90 euros/TTC
Référence: 15820
Marque: Texas Instruments
Référence: 10012
Marque: Texas Instruments
CD4018B types consist of 5 Johnson-Counter stages, buffered Q outputs from each stage, and counter preset control gating. CLOCK, RESET, DATA, PRESET ENABLE, and 5 individual JAM inputs are provided. Divide by 10, 8, 6, 4, or 2 counter configurations can be implemented by feeding the Q5, Q4, Q3, Q2, Q1 signals, respectively, back to the DATA input....
Référence: 15796
Marque: Texas Instruments
Référence: 10047
Marque: Texas Instruments
CD4071B, CD4072B and CD4075B OR gates provide the system designer with direct implementation of the positive-logic OR function and supplement the existing family of CMOS gates.
Référence: 10005
Marque: Texas Instruments
4-ch, 2-input, 3-V to 18-V NAND gates
Référence: 10053
Marque: Texas Instruments
CD4073B, CD4081B and CD4082B AND gates, provide the system designer with direct implementation of the AND function and supplement the existing family of CMOS gates.
Référence: 15795
Marque: Texas Instruments
Référence: 10024
Marque: Texas Instruments
CD4026B and CD4033B each consist of a 5-stage Johnson decade counter and an output decoder which converts the Johnson code to a 7-segment decoded output for driving one stage in a numerical display.
Référence: 10037
Marque: Texas Instruments
The CD405xB analog multiplexers and demuliplexers are digitally-controlled analog switches having low ON impedance and very low OFF leakage current. These multiplexer circuits dissipate extremely low quiescent power over the full VDD – VSS and VDD – VEE supply-voltage ranges, independent of the logic state of the control signals.
Référence: 10044
Marque: Texas Instruments
The CD4069UB device consist of six CMOS inverter circuits. These devices are intended for all general-purpose inverter applications where the medium-power TTL-drive and logic-level-conversion capabilities of circuits such as the CD4009 and CD4049 hex inverter and buffers are not required.
Référence: 10058
Marque: Texas Instruments
CD4099B 8-bit addressable latch is a serial-input, parallel-output storage register that can perform a variety of functions.
Référence: 10042
Marque: Texas Instruments
The CD4066B device is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin-for-pin compatible with the CD4016B device, but exhibits a much lower on-state resistance. In addition, the on-state resistance is relatively constant over the full signal-input range.
Référence: 10039
Marque: Texas Instruments
Référence: 10028
Marque: Texas Instruments
CD4043B types are quad cross-coupled 3-state CMOS NOR latches and the CD4044B types are quad cross-coupled 3-state CMOS NAND latches. Each latch has a separate Q output and individual SET and RESET inputs. The Q outputs are controlled by a common ENABLE input. A logic "1" or high on the ENABLE input connects the latch states to the Q outputs. A logic "0"...
Référence: 10034
Marque: Texas Instruments
The CD4049UB and CD4050B devices are inverting and noninverting hex buffers, and feature logic-level conversion using only one supply voltage (VCC). The input-signal high level (VIH) can exceed the VCC supply voltage when these devices are used for logic-level conversions. These devices are intended for use as CMOS to DTL or TTL converters and can drive...
Référence: 10015
Marque: Texas Instruments
Medium speed operation…12 MHz (typ.) clock rate at VDD – VSS = 10 V Fully static operation 8 master-slave flip-flops plus output buffering and control gating 100% tested for quiescent current at 20 V Maximum input current of 1 µA at 18 V over full package-temperature range; 100 nA at 18 V and 25°C Noise margin (full package-temperature range) = 1...
Référence: 10018
Marque: Texas Instruments
CD4001B, CD4002B, and CD4025B NOR gates provide the system designer with direct implementation of the NOR function and supplement the existing family of CMOS gates. All inputs and outputs are buffered.
Référence: 10017
Marque: Texas Instruments
CD4020B, CD4024B, and CD4040B are ripple-carry binary counters. All counter stages are master-slave flip-flops. The state of a counter advances one count on the negative transition of each input pulse; a high level on the RESET line resets the counter to its all zeros state. Schmitt trigger action on the input-pulse line permits unlimited rise and fall...
Référence: 10002
Marque: Texas Instruments
dual complementary pair plus inverter
CD4015B consists of two identical, independent, 4-stage serial-input/parallel-output registers. Each register has independent CLOCK and RESET inputs as well as a single serial DATA input. "Q" outputs are available from each of the four stages on both registers. All register stages are D-type, master-slave flip-flops. The logic level present at the DATA input is transferred into the first register stage and shifted over one stage at each positive-going clock transition. Resetting of all stages is accomplished by a high level on the reset line. Register expansion to 8 stages using one CD4015B package, or to more than 8 stages using additional CD4015B’s is possible