Référence: 10144
Marque: Panasonic
Condensateur 22µF 10V électrolytique 7x4mm PMC1.5 série FC Panasonic Hauteur : 7mm Diamètre : 4mm Pas : 1.5mm
Référence: 10165
Marque: Panasonic
Condensateur 68µF 16V électrolytique 11x5mm PMC2 série FC Panasonic Hauteur : 11mm Diamètre : 5mm Pas : 2mm
Référence: 10110
Marque: Samwha
Condensateur 1µF 63V électrolytique 12x5mm PMC1.27 Samwha Hauteur : 12mm Diamètre : 5mm Pas : 1.27mm
Référence: 10060
Marque: Samwha
Condensateur 10µF 16V électrolytique 11x5mm PMC1.28 Samwha Hauteur : 11mm Diamètre : 5mm Pas : 1.28mm
Référence: 10383
Marque: Vitrohm
Résistance 2W axial bobinée 10% série BW235 Vitrohm valeur au choix Diamètre : 5.7mm Longueur : 14.3mm Température max. : 175° Tolérance : 10%
CD4011B, CD4012B, and CD4023B NAND gates provide the system designer with direct implementation of the NAND function and supplement the existing family of CMOS gates. All inputs and outputs are buffered.
Livraison Colissimo 6.50 euro/TTC ou Lettre suivie 2.90 euro/TTC
Référence: 10033
Marque: Texas Instruments
CD4048B is an 8-input gate having four control inputs. Three binary control inputs - Ka, Kb, and Kc - provide the implementation of eight different logic functions. These functions are OR, NOR, AND, NAND, OR/AND, OR/NAND, AND/OR and AND/NOR.
Référence: 10055
Marque: Texas Instruments
CD4093B consists of four Schmitt-trigger circuits. Each circuit functions as a two-input NAND gate with Schmitt-trigger action on both inputs. The gate switches at different points for positive- and negative-going signals. The difference between the positive voltage (VP) and the negative voltage (VN) is defined as hysteresis voltage (VH
Référence: 10021
Marque: Texas Instruments
CD4028 types are BCD-to-decimal or binary-to-octal decoders consisting of buffering on all 4 inputs, decoding-logic gates, and 10 output buffers. A BCD code applied to the four input, A to D, results in a high level at the selected one of 10 decimal decoded outputs. Similarly, a 3-bit binary code applied to inputs A through C is decoded in octal code at...
Référence: 10015
Marque: Texas Instruments
CD4014B and CD4021B series types are 8-stage parallel- or serial-input/serial output registers having common CLOCK and PARALLEL/SERIAL CONTROL inputs, a single SERIAL data input, and individual parallel "JAM" inputs to each register stage. Each register stage is D-type, master-slave flip-flop. In addition to an output form stage 8, "Q" outputs are also...
Référence: 10014
Marque: Texas Instruments
CD4020B, CD4024B, and CD4040B are ripple-carry binary counters. All counter stages are master-slave flip-flops. The state of a counter advances one count on the negative transition of each input pulse; a high level on the RESET line resets the counter to its all zeros state. Schmitt trigger action on the input-pulse line permits unlimited rise and fall...
Référence: 10013
Marque: Texas Instruments
CD4019B types consist of four AND/OR select gate configurations, each consisting of two 2-input AND gates driving a single-input OR gate. Selection is accomplished by control bits Ka and Kb. In addition to selection of either channel A or channel B information, the control bits can be applied simultaneously to accomplish the logical A + B function.
Référence: 10050
Marque: Texas Instruments
CD4076B types are four-bit registers consisting of D-type flip-flops that feature three-state outputs. Data Disable inputs are provided to control the entry of data into the flip-flops. When both Data Disable inputs are low, data at the D inputs are loaded into their respective flip-flops on the next positive transition of the clock input. Output Disable...
Référence: 10002
Marque: Texas Instruments
CD4007UB types are comprised of three n-channel and three p-channel enhancement-type MOS transistors. The transistor elements are accessible through the package terminals to provide a convenient means for constructing the various typical circuits.
Référence: 10016
Marque: Texas Instruments
CD4011B, CD4012B, and CD4023B NAND gates provide the system designer with direct implementation of the NAND function and supplement the existing family of CMOS gates. All inputs and outputs are buffered.
Référence: 10010
Marque: Texas Instruments
CD4016B Series types are quad bilateral switches intended for the transmission or multiplexing of analog or digital signals. Each of the four independent bilateral switches has a single control signal input which simultaneously biases both the p and n device in a given switch on or off.
Référence: 10040
Marque: Texas Instruments
CD4060B consists of an oscillator section and 14 ripple-carry binary counter stages. The oscillator configuration allows design of either RC or crystal oscillator circuits. A RESET input is provided which resets the counter to the all-O's state and disables the oscillator. A high level on the RESET line accomplishes the reset function. All counter stages...
Référence: 10022
Marque: Texas Instruments
CD4029B consists of a four-stage binary or BCD-decade up/down counter with provisions for look-ahead carry in both counting modes. The inputs consist of a single CLOCK, CARRY-IN (CLOCK ENABLE), BINARY/DECADE, UP/DOWN, PRESET ENABLE, and four individual JAN signals, Q1, Q2, Q3, Q4 and a CARRY OUT signal are provided as outputs.
Référence: 10005
Marque: Texas Instruments
CD4011UB quad 2-input NAND gate provides the system designer with direct implementation of the NAND function and supplements the existing family of CMOS gates.
Référence: 10008
Marque: Texas Instruments
CD4014B and CD4021B series types are 8-stage parallel- or serial-input/serial output registers having common CLOCK and PARALLEL/SERIAL CONTROL inputs, a single SERIAL data input, and individual parallel "JAM" inputs to each register stage. Each register stage is D-type, master-slave flip-flop. In addition to an output form stage 8, "Q" outputs are also...
Référence: 10004
Marque: Texas Instruments
CD4011B, CD4012B, and CD4023B NAND gates provide the system designer with direct implementation of the NAND function and supplement the existing family of CMOS gates. All inputs and outputs are buffered.
Référence: 10018
Marque: Texas Instruments
CD4001B, CD4002B, and CD4025B NOR gates provide the system designer with direct implementation of the NOR function and supplement the existing family of CMOS gates. All inputs and outputs are buffered.
CD4011B, CD4012B, and CD4023B NAND gates provide the system designer with direct implementation of the NAND function and supplement the existing family of CMOS gates. All inputs and outputs are buffered.
