Référence: 10144
Marque: Panasonic
Condensateur 22µF 10V électrolytique 7x4mm PMC1.5 série FC Panasonic Hauteur : 7mm Diamètre : 4mm Pas : 1.5mm
Référence: 10165
Marque: Panasonic
Condensateur 68µF 16V électrolytique 11x5mm PMC2 série FC Panasonic Hauteur : 11mm Diamètre : 5mm Pas : 2mm
Référence: 10110
Marque: Samwha
Condensateur 1µF 63V électrolytique 12x5mm PMC1.27 Samwha Hauteur : 12mm Diamètre : 5mm Pas : 1.27mm
Référence: 10060
Marque: Samwha
Condensateur 10µF 16V électrolytique 11x5mm PMC1.28 Samwha Hauteur : 11mm Diamètre : 5mm Pas : 1.28mm
Référence: 10383
Marque: Vitrohm
Résistance 2W axial bobinée 10% série BW235 Vitrohm valeur au choix Diamètre : 5.7mm Longueur : 14.3mm Température max. : 175° Tolérance : 10%
CD4007UB types are comprised of three n-channel and three p-channel enhancement-type MOS transistors. The transistor elements are accessible through the package terminals to provide a convenient means for constructing the various typical circuits.
Livraison Colissimo 6.50 euro/TTC ou Lettre suivie 2.90 euro/TTC
Référence: 10017
Marque: Texas Instruments
CD4020B, CD4024B, and CD4040B are ripple-carry binary counters. All counter stages are master-slave flip-flops. The state of a counter advances one count on the negative transition of each input pulse; a high level on the RESET line resets the counter to its all zeros state. Schmitt trigger action on the input-pulse line permits unlimited rise and fall...
Référence: 10038
Marque: Texas Instruments
The CD405xB analog multiplexers and demuliplexers are digitally-controlled analog switches having low ON impedance and very low OFF leakage current. These multiplexer circuits dissipate extremely low quiescent power over the full VDD – VSS and VDD – VEE supply-voltage ranges, independent of the logic state of the control signals.
Référence: 10034
Marque: Texas Instruments
The CD4049UB and CD4050B devices are inverting and noninverting hex buffers, and feature logic-level conversion using only one supply voltage (VCC). The input-signal high level (VIH) can exceed the VCC supply voltage when these devices are used for logic-level conversions. These devices are intended for use as CMOS to DTL or TTL converters and can drive...
Référence: 10009
Marque: Texas Instruments
CD4015B consists of two identical, independent, 4-stage serial-input/parallel-output registers. Each register has independent CLOCK and RESET inputs as well as a single serial DATA input. "Q" outputs are available from each of the four stages on both registers. All register stages are D-type, master-slave flip-flops. The logic level present at the DATA...
Référence: 10039
Marque: Texas Instruments
Référence: 10021
Marque: Texas Instruments
CD4028 types are BCD-to-decimal or binary-to-octal decoders consisting of buffering on all 4 inputs, decoding-logic gates, and 10 output buffers. A BCD code applied to the four input, A to D, results in a high level at the selected one of 10 decimal decoded outputs. Similarly, a 3-bit binary code applied to inputs A through C is decoded in octal code at...
Référence: 10025
Marque: Texas Instruments
CD4020B, CD4024B, and CD4040B are ripple-carry binary counters. All counter stages are master-slave flip-flops. The state of a counter advances one count on the negative transition of each input pulse; a high level on the RESET line resets the counter to its all zeros state. Schmitt trigger action on the input-pulse line permits unlimited rise and fall...
Référence: 10011
Marque: Texas Instruments
CD4017B and CD4022B are 5-stage and 4-stage Johnson counters having 10 and 8 decoded outputs, respectively. Inputs include a CLOCK, a RESET, and a CLOCK INHIBIT signal. Schmitt trigger action in the CLOCK input circuit provides pulse shaping that allows unlimited clock input pulse rise and fall times.
Référence: 10050
Marque: Texas Instruments
CD4076B types are four-bit registers consisting of D-type flip-flops that feature three-state outputs. Data Disable inputs are provided to control the entry of data into the flip-flops. When both Data Disable inputs are low, data at the D inputs are loaded into their respective flip-flops on the next positive transition of the clock input. Output Disable...
Référence: 10045
Marque: Texas Instruments
The Harris CD4070B contains four independent Exclusive-OR gates. The Harris CD4077B contains four independent Exclusive-NOR gates. The CD4070B and CD4077B provide the system designer with a means for direct implementation of the Exclusive-OR and Exclusive-NOR functions, respectively.
Référence: 10041
Marque: Texas Instruments
CD4063B is a 4-bit magnitude comparator designed for use in computer and logic applications that require the comparison of two 4-bit words. This logic circuit determines whether one 4-bit word (Binary or BCD) is "less than", "equal to", or "greater than" a second 4-bit word.
Référence: 10016
Marque: Texas Instruments
CD4011B, CD4012B, and CD4023B NAND gates provide the system designer with direct implementation of the NAND function and supplement the existing family of CMOS gates. All inputs and outputs are buffered.
Référence: 10032
Marque: Texas Instruments
CD4047B consists of a gatable astable multivibrator with logic techniques incorporated to permit positive or negative edge-triggered monostable multivibrator action with retriggering and external counting options.
Référence: 10027
Marque: Texas Instruments
CD4042B types contain four latch circuits, each strobed by a common clock. Complementary buffered outputs are available from each circuit. The impedance of the n- and p-channel output devices is balanced and all outputs are electrically identical.
Référence: 10018
Marque: Texas Instruments
CD4001B, CD4002B, and CD4025B NOR gates provide the system designer with direct implementation of the NOR function and supplement the existing family of CMOS gates. All inputs and outputs are buffered.
Référence: 10013
Marque: Texas Instruments
CD4019B types consist of four AND/OR select gate configurations, each consisting of two 2-input AND gates driving a single-input OR gate. Selection is accomplished by control bits Ka and Kb. In addition to selection of either channel A or channel B information, the control bits can be applied simultaneously to accomplish the logical A + B function.
CD4007UB types are comprised of three n-channel and three p-channel enhancement-type MOS transistors. The transistor elements are accessible through the package terminals to provide a convenient means for constructing the various typical circuits.
