74HC

Référence: 10384

Marque: Texas Instruments

74HC00 - SN74HC00N Quad 2-input nand gate DIP-14 Texas RoHS

The SN54HC00 and SN74HC00 devices contain four independent, 2-input NAND gates. They perform the Boolean function Y = A × B or Y = A + B in positive logic.

Référence: 10385

Marque: Texas Instruments

74HC02 - SN74HC02N Quadruple 2-Input Positive-NOR Gates DIP-14 Texas RoHS

The SNx4HC02 devices contain four independent 2- input NOR gates. They perform the Boolean function Y = A + B or Y = A • B in positive logic.

Référence: 15251

Marque: Texas Instruments

74HC03 - SN74HC03N Quadruple 2-Input Positive-NAND Gates DIP-14 Texas RoHS

Référence: 10386

Marque: Texas Instruments

74HC04 - SN74HC04N Hex Inverters DIP-14 Texas RoHS

The SNx4HC04 devices contain six independent. They perform the Boolean function Y = A in logic.

Référence: 11354

Marque: Texas Instruments

74HC05 - SN74HC05N Hex Inverters With Open-Drain Outputs DIP-14 Texas RoHS

Wide Operating Voltage Range of 2 V to 6 V Outputs can Drive up to 10 LSTTL Loads Low-Power Consumption, 20-µA Maximum ICC Typical tpd = 8 ns ±4-mA Output Drive at 5 V Low Input Current of 1-µA Maximum

Référence: 10387

Marque: Texas Instruments

74HC08 - SN74HC08N Quadruple 2-input positive-AND gates DIP-14 Texas RoHS

Référence: 10388

Marque: Texas Instruments

74HC10 - SN74HC10N Triple 3-Input Positive-NAND Gates DIP-14 Texas RoHS

The ’HC10 devices contain three independent 3-input NAND gates. They perform the Boolean function Y = A • B • C or Y = A + B + C in positive logic.

Référence: 10397

Marque: Texas Instruments

74HC109 - SN74HC109N Dual J-K Positive-Edge-Triggered Flip-Flops DIP-16 Texas Ro

These devices contain two independent J-K positive-edge-triggered flip-flops. A low level at the preset (PRE) or clear (CLR) inputs sets or resets the outputs, regardless of the levels of the other inputs. When PRE and CLR are inactive (high), data at the J and K inputs meeting the setup-time requirements are transferred to the outputs on the...

Référence: 10389

Marque: Texas Instruments

74HC11 - SN74HC11N Triple 3-Input Positive-AND Gates DIP-14 Texas RoHS

The ’HC11 devices contain three independent 3-input AND gates. They perform the Boolean function Y A • B • C or Y A B C in positive logic.

Référence: 10398

Marque: Texas Instruments

74HC112 - SN74HC112N Dual J-K Negative-Edge-Triggered Flip-Flops DIP-16 Texas Ro

The ’HC112 devices contain two independent J-K negative-edge-triggered flip-flops. A low level at the preset (PRE) or clear (CLR) inputs sets or resets the outputs, regardless of the levels of the other inputs. When PRE and CLR are inactive (high), data at the J and K inputs meeting the setup time requirements are transferred to the outputs on the...

Référence: 10399

Marque: Texas Instruments

74HC123 - CD74HC123E Dual Retriggerable Monostable Multivibrators DIP-16 Texas R

The ’HC112 devices contain two independent J-K negative-edge-triggered flip-flops. A low level at the preset (PRE) or clear (CLR) inputs sets or resets the outputs, regardless of the levels of the other inputs. When PRE and CLR are inactive (high), data at the J and K inputs meeting the setup time requirements are transferred to the outputs on the...

Référence: 11355

Marque: Texas Instruments

74HC125 - SN74HC125N Quadruple Bus Buffer Gates DIP-14 Texas RoHS

Wide Operating Voltage Range of 2 V to 6 V High-Current 3-State Outputs Interface Directly With System Bus or Can Drive Up to 15 LSTTL Loads Low Power Consumption, 80-µA Maximum ICC Typical tpd = 11 ns ±6-mA Output Drive at 5 V Low Input Current of 1 µA Maximum

Référence: 11356

Marque: Texas Instruments

74HC132 - SN74HC132N Quadruple Positive-NAND Gates DIP-14 Texas RoHS

Wide Operating Voltage Range of 2 V to 6 V Outputs Can Drive up to 10 LSTTL Loads Low Power Consumption, 20-µA Maximum ICC Typical tpd = 14 ns ±4-mA Output Drive at 5 V Low Input Current of 1 µA Maximum Operation from Very Slow Input Transitions Temperature-Compensated Threshold Levels High Noise Immunity Same Pinouts as SN74HC00

Référence: 11357

Marque: Texas Instruments

74HC138 - SN74HC138N 3-Line To 8-Line Decoders/Demultiplexers DIP-16 Texas RoHS

Targeted Specifically for High-Speed Memory Decoders and Data-Transmission Systems Wide Operating Voltage Range (2 V to 6 V) Outputs Can Drive Up To 10 LSTTL Loads Low Power Consumption, 80-µA Maximum ICC Typical tpd = 15 ns ±4-mA Output Drive at 5 V Low Input Current of 1-µA Maximum Active Low Outputs ( Selected Output is Low) Incorporate Three Enable...

Référence: 11358

Marque: Texas Instruments

74HC139 - SN74HC139N Dual 2-Line To 4-Line Decoders/Demultiplexers DIP-16 Texas

Dual 2-Line To 4-Line Decoders/Demultiplexers

Référence: 10390

Marque: Texas Instruments

74HC14 - SN74HC14N Hex Schmitt-Trigger Inverters DIP-14 Texas RoHS

The SNx4HC14 are Schmitt-trigger devices that contain six independent inverters. They perform the Boolean function Y = A in positive logic.

Référence: 11843

Marque: Texas Instruments

74HC147 - CD74HC147E 10 To 4 line priority encoder DIP-16 Texas RoHS

Référence: 10900

Marque: Texas Instruments

74HC148 - SN74HC148N 8-Line To 3-Line Priority Encoders DIP-16 Texas RoHS

Wide Operating Voltage Range of 2 V to 6 V Outputs Can Drive Up To 10 LSTTL Loads Low Power Consumption, 80-µA Max ICC Typical tpd = 16 ns ±4-mA Output Drive at 5 V Low Input Current of 1 µA Max Encode Eight Data Lines to 3-Line Binary (Octal) Applications Include: n-Bit Encoding Code Converters and Generators

Référence: 11359

Marque: Texas Instruments

74HC151 - SN74HC151N 8-Line To 1-Line Data Selectors/Multiplexers DIP-16 Texas R

Wide Operating Voltage Range of 2 V to 6 V Outputs Can Drive Up To 10 LSTTL Loads Low Power Consumption, 80-µA Max ICC Typical tpd = 13 ns ±6-mA Output Drive at 5 V Low Input Current of 1 µA Max 8-Line to 1-Line Multiplexers Can Perform as: Boolean Function Generators Parallel-to-Serial Converters Data Source Selectors

Référence: 11360

Marque: Texas Instruments

74HC157 - SN74HC157N Quadruple 2-Line To 1-Line Data Selectors/Multiplexers DIP-

Wide Operating Voltage Range of 2 V to 6 V Outputs Can Drive Up To 15 LSTTL Loads Low Power Consumption, 80-µA Max ICC Typical tpd = 11 ns ±6-mA Output Drive at 5 V Low Input Current of 1 µA Max

Référence: 11361

Marque: Texas Instruments

74HC161 - SN74HC161N 4-Bit Synchronous Binary Counters DIP-16 Texas RoHS

Wide Operating Voltage Range of 2 V to 6 V Outputs Can Drive Up To 10 LSTTL Loads Low Power Consumption, 80-µA Max ICC Typical tpd = 14 ns ±4-mA Output Drive at 5 V Low Input Current of 1 µA Max Internal Look-Ahead for Fast Counting Carry Output for n-Bit Cascading Synchronous Counting Synchronously Programmable

Référence: 11363

Marque: Texas Instruments

74HC163 - SN74HC163N 4-Bit Synchronous Binary Counters DIP-16 Texas RoHS

Wide Operating Voltage Range of 2 V to 6 V Outputs Can Drive Up To 10 LSTTL Loads Low Power Consumption, 80-µA Max ICC Typical tpd = 14 ns ±4-mA Output Drive at 5 V Low Input Current of 1 µA Max Internal Look-Ahead for Fast Counting Carry Output for n-Bit Cascading Synchronous Counting Synchronously Programmable

Référence: 11364

Marque: Texas Instruments

74HC164 - SN74HC164N 8-Bit Parallel-Out Serial Shift Registers DIP-14 Texas RoHS

Wide Operating Voltage Range of 2 V to 6 V Outputs Can Drive Up to 10 LSTTL Loads Low Power Consumption, 80-µA Maximum ICC Typical tpd = 20 ns ±4-mA Output Drive at 5 V Low Input Current of 1-µA Maximum AND-Gated (Enable/Disable) Serial Inputs Fully Buffered Clock and Serial Inputs Direct Clear On Products Compliant to MIL-PRF-38535, All Parameters Are...

Référence: 11365

Marque: Texas Instruments

74HC165 - SN74HC165N 8-Bit Parallel-Load Shift Registers DIP-16 Texas RoHS

Wide Operating Voltage Range of 2 V to 6 V Outputs Can Drive Up to 10 LSTTL Loads Low Power Consumption, 80-µA Maximum ICC Typical tpd = 13 ns ±4-mA Output Drive at 5 V Low Input Current of 1 µA Maximum Complementary Outputs Direct Overriding Load (Data) Inputs Gated Clock Inputs Parallel-to-Serial Data Conversion On Products Compliant to MIL-PRF-38535,...

Référence: 11366

Marque: Texas Instruments

74HC166 - SN74HC166N 8-Bit Parallel-Load Shift Registers DIP-16 Texas RoHS

Wide Operating Voltage Range of 2 V to 6 V Outputs Can Drive Up To 10 LSTTL Loads Low Power Consumption, 80-µA Max ICC Typical tpd = 13 ns ±4-mA Output Drive at 5 V Low Input Current of 1 µA Max Synchronous Load Direct Overriding Clear Parallel-to-Serial Conversion

Référence: 11367

Marque: Texas Instruments

74HC174 - SN74HC174N Hex D-Type Flip-Flops With Clear DIP-16 Texas RoHS

Wide Operating Voltage Range of 2 V to 6 V Outputs Can Drive Up To 10 LSTTL Loads Low Power Consumption, 80-µA Max ICC Typical tpd = 14 ns ±4-mA Output Drive at 5 V Low Input Current of 1 µA Max Contain Six Flip-Flops With Single-Rail Outputs Applications Include: Buffer/Storage Registers Shift Registers Pattern Generators

Référence: 11368

Marque: Texas Instruments

74HC175 - SN74HC175N Quadruple D-Type Flip-Flops With Clear DIP-16 Texas RoHS

Wide Operating Voltage Range of 2 V to 6 V Outputs Can Drive Up To 10 LSTTL Loads Low Power Consumption, 80-µA Max ICC Contain Four Flip-Flops With Double-Rail Outputs Typical tpd = 13 ns ±4-mA Output Drive at 5 V Low Input Current of 1 µA Max Applications Include: Buffer/Storage Registers Shift Registers Pattern Generators

Référence: 16904

Marque: Texas Instruments

74HC190 - CD74HC190E Presettable synch BNC DIP-16 Texas RoHS

Référence: 11369

Marque: Texas Instruments

74HC191- SN74HC191N 4-Bit Synchronous Up/Down Binary Counters DIP-16 Texas RoHS

Wide Operating Voltage Range of 2 V to 6 V Outputs Can Drive Up To 10 LSTTL Loads Low Power Consumption, 80-µA Max ICC Typical tpd = 13 ns ±4-mA Output Drive at 5 V Low Input Current of 1 µA Max Single Down/Up Count-Control Line Look-Ahead Circuitry Enhances Speed of Cascaded Counters Fully Synchronous in Count Modes Asynchronously Presettable With Load...

Référence: 11370

Marque: Texas Instruments

74HC193 - SN74HC193N 4-Bit Synchronous Up/Down Counters DIP-16 Texas RoHS

Wide Operating Voltage Range of 2 V to 6 V Outputs Can Drive Up To 10 LSTTL Loads Low Power Consumption, 80-µA Max ICC Typical tpd = 20 ns ±4-mA Output Drive at 5 V Low Input Current of 1 µA Max Look-Ahead Circuitry Enhances Cascaded Counters Fully Synchronous in Count Modes Parallel Asynchronous Load for Modulo-N Count Lengths Asynchronous Clear